SparkFun Forums 

Where electronics enthusiasts find answers.

Topics pertaining to the Arduino Core & software used with the Artemis module and Artemis development boards.
User avatar
By TheResister
#233427
I bought an Artemis Nano and I can't get any pin to act like it has an internal pullup resistor.
I've tried digitalWrite(pin,HIGH) after setting the pinMode(pin, INPUT_PULLUP), but that was no help.
I've attached pin interrupts to every pin and they all seem to float unless I use an external pullup resistor. If I use an external pullup resistors, everything seems to work just fine. Is there something I'm missing in order to get the internal resistors to be activated? Or are there no internal pullup resistors in the Artemis Apollo3 cores? I can't find anything that tells me there isn't. And there is a ton of code that uses the INPUT_PULLUP mode.

Shouldn't digitalRead() return a HIGH value if I set a pin to INPUT_PULLUP while the pin is not connected?

This is my first Artemis board and I'm hoping I'm just missing something.

RedBoard Artemis Nano from SparkFun using Apollo3 board library in the Arduino 1.8.19 IDE.
By paulvha
#233437
There should be no reason why this would not work.

When you set a pinMode(D4, INPUT_PULLUP) the library will always set the pinName (D4) as input followed by setting pull-up.

Shouldn't digitalRead() return a HIGH value if I set a pin to INPUT_PULLUP while the pin is not connected? -> YES
My test sketch:
Code: Select all
void setup() {
  Serial.begin(115200);
  while (!Serial);
  Serial.println("test D4");
  pinMode(D4,INPUT_PULLUP);

}

void loop() {
  Serial.println(digitalRead(D4));
  delay(1000);
}
Connect a wire between D4 to GND and it will read 0 else it will read 1.

Can you share your sketch ?
User avatar
By TheResister
#233444
Thanks for the confirmation. I think I have damaged hardware. Now I'm getting an error when I try to upload a sketch.

Target failed to enter bootload mode. Verify the right COM port is selected and that your board has the SVL bootloader.
 Topic permissions

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

long long title how many chars? lets see 123 ok more? yes 60

We have created lots of YouTube videos just so you can achieve [...]

Another post test yes yes yes or no, maybe ni? :-/

The best flat phpBB theme around. Period. Fine craftmanship and [...]

Do you need a super MOD? Well here it is. chew on this

All you need is right here. Content tag, SEO, listing, Pizza and spaghetti [...]

Lasagna on me this time ok? I got plenty of cash

this should be fantastic. but what about links,images, bbcodes etc etc? [...]