SparkFun Forums 

Where electronics enthusiasts find answers.

Everything with the AmbiqSuite SDK tools and software are welcome here.
User avatar
By fbtobajas
Hi, after several weeks, i've successfully executed the ble_freertos_dats/ble_freertos_datc apps in my artemis_thing_plus boards with WDXC_ENABLED/WDXS_ENABLED options in order to perform data streaming and try to measure the achievable data rates between a central and a peripheral device (with MTU=241). In case i change, i.e. the connection interval, the experimental data rate i obtain seems to be ok. however, in case i define CS50_INCLUDED with both 1M PHY and 2M PHY BLE5 modes, the data rates are almost the same ... is that correct? ... is there any limitation of artemis_thing_plus board which can explain this behaviour?. I would really appreciate any help or any comment related to other experiments regarding this issue.
Best regards
 Topic permissions

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum