SparkFun Forums 

Where electronics enthusiasts find answers.

Questions about the BatchPCB service

Moderator: robacarp

#7030
I made a test board, and I wanted to run it through the online checker first, and this is what it gave me: (I am using PCB Wizard 3)

PCB Wizard: Drill File Checker

- File Uploaded
- File Read Complete
- Temporary File Deleted
- Array Extracted
- Tools Selections Removed
- Drill Sizes Extracted [0]
- Drill Sizes Examined:

and a few times, without changing anything, just trying it again, it gave me this:

PCB Wizard: Drill File Checker

- File Uploaded
- File Read Complete
- Temporary File Deleted
- Array Extracted
- Tools Selections Removed
- Drill Sizes Extracted [1]
- Drill Sizes Examined:
Drill Too Small in line: Trailing zero suppression.

this is my .drl file:
M48
%
T01
X011Y021
X01Y021
X009Y021
X006Y025
X006Y021
X013Y019
X013Y017
X017Y018
X016Y018
X01Y028
X01Y024
X011Y016
X011Y018
X008Y017
X008Y018
X015Y005
X019Y005
X023Y006
X023Y005
X023Y004
X015Y011
X015Y008
X017Y023
X019Y023
X018Y023
X023Y008
X023Y009
X02Y009
X02Y008
X021Y003
X017Y003
X022Y015
X021Y015
X02Y015
X019Y015
X019Y012
X02Y012
X021Y012
X022Y012
X017Y015
X015Y015
X025Y009
X025Y013
X011Y01
X004Y009
X005Y01
X004Y011
X026Y006
X026Y004
X022Y018
X02Y017
X019Y02
X025Y015
T02
X004Y019
X004Y021
M30

Screen shot of my settings in PCB Wizard 3
Image

any help would be great.
By donblake
#7032
It appears that your drill fill is missing the drill information (i.e., the sizes for T01 and T02). See this thread for more information.

I don't have any experience with PCB Wizard 3so I cannot help further.

don
By nomad
#7255
Figured out that the drill sizes are in a *.inf file that is created with the *.drl file. Will I need to move the drill info into the drl file with the new upcoming system, or will I just need to upload the drl and inf files?
Thanks! Below is the inf file:

PCB Wizard 3 NC-Drill Export
----------------------------

Created : 9/23/2005 3:34:52 PM
Source : PCB Wizard 3.50 (28 Oct 2004)
Design :
Title :
Author :
Company :

2.3 format, inches, absolute.
Trailing zero suppression.

----

File: "C:\Documents and Settings\Steve\My Documents\pcb wiz3.5 save\agdc-b.drl"

Drill hole layer

T-Code Size
T01 .020
T02 .040

----

End of report.