SparkFun Forums 

Where electronics enthusiasts find answers.

Questions about the BatchPCB service

Moderator: robacarp

By wearable
I'm looking for Eagle libraries for 2 connectors:

1) GM862 SMD Connector: Molex 53748-0504

2) Lassen IQ SMD Connector: Samtec CLP-104-02-G-D

Does anyone have these?

By starboarder2001
I spent allot of time searching for libraries for ZH JST connectors but I found it was allot easier to just make them myself. If it is not included in the default libraries, its probably best that you made it yourself.
Does anyone have an Eagle library for the GM862 molex connector he/she wouldn't mind sharing? Obviously I can make my own, but since it's probably been built independently by 1001 people, I thought it was worth checking here first.

I'd be happy to host the library on my site or submit it to Eagle after verifying it is correct.

By cirutech
I have drawn by myself the footprint for the GM862 and of its outline and TH pads. I can share it, of course.
tell me the best way to do it.


By bretth
Email is probably easiest. My address is b AT hackleman DOT net. If you don't mind, I'll double check the layout and post it to my website, and put a URL here.

By raduf517
Hello! I have recently bought the GM862 SMD Connector: Molex 53748-0504 and I would like to make a breakout board for it, however I don't have an Eagle footprint for this connector and I was wondering if anyone can help me out with an already drawn footprint.

Thank you very much!