SparkFun Forums 

Where electronics enthusiasts find answers.

General suggestions or questions about the SparkFun Electronics website
By tedd
#193447
On this page
https://learn.sparkfun.com/tutorials/9d ... okup-guide
or
http://sfe.io/t567
or more exactly below this paragraph:
https://learn.sparkfun.com/tutorials/9d ... e-firmware
under the text "The string can be modified by sending any of the following commands:"
there are 2 commands missing from the list of commands, which I assume to be very useful for newcomers, like me:

#define ENABLE_TIME 't' // Enable/disable time log (milliseconds)
#define ENABLE_HEADING 'h' // Enable/disable estimated heading logging