Page 1 of 1
You are not authorised to read this forum.
Posted: Thu Mar 06, 2014 2:25 pm
by tkram01
Re: You are not authorised to read this forum.
Posted: Fri Mar 07, 2014 7:11 pm
by phalanx
Probably because you were a new user and it's a locked thread. Try it again now that your account is set to normal.
-Bill
Re: You are not authorised to read this forum.
Posted: Fri Mar 07, 2014 8:50 pm
by jremington
I'm not authorized either. What is Spark Fun trying to hide? The NSA probably knows...
Re: You are not authorised to read this forum.
Posted: Fri Mar 07, 2014 8:54 pm
by phalanx
Is the problem with the entire subforum or just the post?
-Bill
Re: You are not authorised to read this forum.
Posted: Fri Mar 07, 2014 9:03 pm
by phalanx
The permissions for the BatchPCB forum were supposed to be set to read only when it was locked but were accidently set to "no access." I put it back to read only so let me know if you can access it now.
-Bill
Re: You are not authorised to read this forum.
Posted: Sat Mar 08, 2014 9:21 am
by Mee_n_Mac
I can access that post and the forum, despite the latter indicating that it's locked. You'll have to be trickier than that to fool the NSA.