Problem with 9D0F razor

General suggestions or questions about the SparkFun Electronics website

Moderators: phalanx, CS Paul

Post Reply
webmonzter
Posts: 1
Joined: Thu Mar 01, 2012 7:49 am

Problem with 9D0F razor

Post by webmonzter » Thu Mar 01, 2012 8:00 am

I bought 9D0F razor(Accelero + gylo + magneto) Then I test code that sparkfun give it at http://www.sparkfun.com/products/10736
both of Test Firmware and AHRS Code but I can't read all of value by usart (RS232).
It show like this "ÿàþÿ€ÿüÿÿ€ÿøÿÀ€€ðÿÿðÿøÀÀþþÿÿÿþüÿ€€þàÀ..." I don't know why ??
I had setting baudrate 57600
please help me...
Thank you :)

CS Paul
Posts: 128
Joined: Fri Apr 02, 2010 7:37 am

Re: Problem with 9D0F razor

Post by CS Paul » Thu Mar 01, 2012 12:50 pm

The right folks probably won't see you in this forum. I'd suggest something over in the Technical Discussion section.

Post Reply