SparkFun Forums

[atom]

The webpage (http://www.sparkfun.com/commerce/produc ... cts_id=718) for the new FTDI232RL breakout board appears to be missing a link to the schematic. I was just wondering what pins were brought out to the holes on the sides. I see Rx, Tx, Gnd, and 3.3V but I was wondering if all of the other data pins like DTR, RTS, RI, DSR, DCD, and CTS were brought as well?

[JamesC]

Something with the physical dimensions would be nice too...

[sparky]

Owen just got it posted:
http://www.sparkfun.com/datasheets/Brea ... ematic.PDF

We are not too good at dimensional drawings. Anyone have a recommendation on how to create them in Eagle or any other technique short of a Pro-E model?

-Nathan

[leon_heller]

Owen just got it posted:
http://www.sparkfun.com/datasheets/Brea ... ematic.PDF

We are not too good at dimensional drawings. Anyone have a recommendation on how to create them in Eagle or any other technique short of a Pro-E model?

-Nathan

I use Pulsonix which has very good dimensioning facilities. You might be able to export a DXF file and add the dimensions in a standard 2D CAD program.

Leon