PIC-28pin dev board DEV-00018

General suggestions or questions about the SparkFun Electronics website

Moderators: phalanx, CS Paul

Post Reply
jremington
Support Volunteer
Posts: 2103
Joined: Fri Jun 15, 2007 9:41 pm
Location: Eugene, Or

PIC-28pin dev board DEV-00018

Post by jremington » Mon Feb 07, 2011 9:29 pm

Any word on when the 28-pin DEV-00018 board (No USB) will be back in stock?
I would like one ASAP!

Thanks, Jim Remington

CS Paul
Posts: 128
Joined: Fri Apr 02, 2010 7:37 am

Re: PIC-28pin dev board DEV-00018

Post by CS Paul » Tue Feb 08, 2011 10:31 am

Currently looking like 3-5 weeks. May be faster, but judging from our normal turnaround from Olimex, early to mid March is most likely.

JonChandler
Posts: 226
Joined: Fri Jun 17, 2005 1:05 pm
Contact:

Re: PIC-28pin dev board DEV-00018

Post by JonChandler » Wed Feb 23, 2011 12:07 pm

Would the TAP-28 PIC application board work for you? It's got a different focus than the DEV-0018 board - it's designed to interface to real-world sensors, servos, dev boards, etc. It's sold as a blank board so it can be customized to your application. Because it doesn't have all the bells and whistles, it's cheap - $10 each or 3 for $25.

TAP-28 Application Board

If you send me a private message here, I'll give the readers of this forum a special deal. 3 TAP-2 boards for $20, including shipping.
Attachments
Board stuffed.jpg
board - med.jpg
Jon

Post Reply