Page 2 of 2

Re: Simple parts inventory program? (free or opensource)

Posted: Wed Jan 09, 2013 4:16 pm
by kirash4
Then there's inFlow which is free for up to 100 parts, after that it's $299 for unlimited, and $499 for the version with all the bells and whistles. As far as the OP's request, inFlow wouldn't work because its free version can't manage more than 100 parts, and the unlimited one is $299 ... both criterias will fail. :)

But it is a nice piece of software. So much so I've considered, for a brief moment, to write an open source, web based version of sorts for myself. But I haven't revisited that idea ... since I first installed inFlow to play with.

Re: Simple parts inventory program? (free or opensource)

Posted: Tue Jan 22, 2013 5:35 am
by NickIvanter
Parts-in-Place is a simple BOM & inventory web app that has been specifically designed for use with electronics parts, aiming to address this very pain expressed by George:
george graves wrote: The reason why I ask is last night it took me 7 hours to figure out what I needed to order from mouser. It was not fun trying to figure out what I had on hand, what was needed, etc..

Re: Simple parts inventory program? (free or opensource)

Posted: Thu Apr 24, 2014 4:10 pm
by Mr.Clean1814
Ran across this program while looking for something for work.

http://www.partkeepr.org/

Re: Simple parts inventory program? (free or opensource)

Posted: Thu Aug 28, 2014 10:17 am
by elecfun
Ciiva is another cloud based electronic components and bill of materials management solution. The free version has a limit of starting as 3000 components, and up to 10,000 components if you inviting friends to join it. Guess it is enough for building several dozen big BOMs.
http://ciiva.com/bill-of-materials-soft ... scriptions

Image

Re: Simple parts inventory program? (free or opensource)

Posted: Tue Jan 27, 2015 9:05 pm
by TurboPT
Here's a list of various free open source ERP software, in a nifty table format.

Re: Simple parts inventory program? (free or opensource)

Posted: Mon May 02, 2016 1:51 am
by jrychter
Hey everyone,

I realize this is an old thread, but I thought I'd post anyway, for those people who came here recently. I had the same problem (keeping track of electronic parts) and ended up launching an application that does it right.

Check out PartsBox https://partsbox.io/ — it's free for hobbyists/makers. Businesses need to pay, but should get lots of value out of it, so that should not be a problem. Functionality is designed so that no hobbyist should need things from the commercial plans (you don't normally need lot control, internal part numbers, or real-time BOM pricing as a hobbyist).

--Jan Rychter
Founder, PartsBox · https://partsbox.io/ · Twitter: @PartsBoxIO

Re: Simple parts inventory program? (free or opensource)

Posted: Tue Nov 28, 2017 5:17 pm
by cidadao
Hey guys,

This is an old thread but just in case someone stumbles upon it, here's my recommendation:
BOMIST - https://bomist.com

It's a software that runs locally on your computer (not cloud nor web based) but has several online utilities, making it "smarter". You can have as many databases (called Workspaces) as you like and its FREE for maker/hobbyist usage.