2 missing commands on this page: sfe.io/t567

General suggestions or questions about the SparkFun Electronics website

Moderators: phalanx, CS Paul

2 missing commands on this page: sfe.io/t567

Postby tedd » Thu Feb 16, 2017 4:30 am

On this page
https://learn.sparkfun.com/tutorials/9dof-razor-imu-m0-hookup-guide
or
http://sfe.io/t567
or more exactly below this paragraph:
https://learn.sparkfun.com/tutorials/9dof-razor-imu-m0-hookup-guide#getting-started-with-the-example-firmware
under the text "The string can be modified by sending any of the following commands:"
there are 2 commands missing from the list of commands, which I assume to be very useful for newcomers, like me:

#define ENABLE_TIME 't' // Enable/disable time log (milliseconds)
#define ENABLE_HEADING 'h' // Enable/disable estimated heading logging
tedd
 
Posts: 11
Joined: Thu Feb 16, 2017 2:04 am


Return to SparkFun Site Questions/Comments

Who is online

Users browsing this forum: No registered users and 1 guest