- Tue Dec 18, 2018 9:12 pm
#201449
Anyone else seeing this behavior when attempting to use the SparkFun SHTC3 Library:
SHTC3 Example 1 - Basic Readings
Beginning sensor. Result = Nominal
ID Passed Checksum. Device ID: 0b100001000111
Waiting for 5 seconds so you can read this info ^^^
RH = 100.00% (checksum: fail), T = 266.00 deg F (checksum: fail)
RH = 100.00% (checksum: fail), T = 266.00 deg F (checksum: fail)
RH = 100.00% (checksum: fail), T = 266.00 deg F (checksum: fail)
RH = 100.00% (checksum: fail), T = 266.00 deg F (checksum: fail)
RH = 100.00% (checksum: fail), T = 266.00 deg F (checksum: fail)
I've tried slowing down serial comms to 9600 and the I2C speed to 100 Mhz with no change in behavior.
SHTC3 Example 1 - Basic Readings
Beginning sensor. Result = Nominal
ID Passed Checksum. Device ID: 0b100001000111
Waiting for 5 seconds so you can read this info ^^^
RH = 100.00% (checksum: fail), T = 266.00 deg F (checksum: fail)
RH = 100.00% (checksum: fail), T = 266.00 deg F (checksum: fail)
RH = 100.00% (checksum: fail), T = 266.00 deg F (checksum: fail)
RH = 100.00% (checksum: fail), T = 266.00 deg F (checksum: fail)
RH = 100.00% (checksum: fail), T = 266.00 deg F (checksum: fail)
I've tried slowing down serial comms to 9600 and the I2C speed to 100 Mhz with no change in behavior.