- Thu Oct 25, 2018 12:18 am
#200781
Hi!
So I'm working on a project with the Spectrum Shield (MSGEQ7). After not using it for a few days though I am not getting any input at all from the board. I've done this so far:
Checked that the STROBE and RESET pins work
Checked that the A0 and A0 analog input pins work
Checked that the board is receiving power
Reset the board and used different code about a thousand times
So I'm working on a project with the Spectrum Shield (MSGEQ7). After not using it for a few days though I am not getting any input at all from the board. I've done this so far:
Checked that the STROBE and RESET pins work
Checked that the A0 and A0 analog input pins work
Checked that the board is receiving power
Reset the board and used different code about a thousand times