- Wed Oct 24, 2018 7:07 pm
#200778
Is it possible to flash the spakfun esp8266 thing dev over the air (ota)?
I've read some people saying there is not enough memory to do this?
Here is what I tried...
With the Arduino IDE, I uploaded the example firstOTA and flashed via serial port.
After resetting I can see my network port and I can ping thing dev
now if I try to flash blink from the network port, it keep giving me this message...
Bad Answer: ERR: ERROR[8]: Flash config wrong real: 2 IDE: 524288
Flash size: 512 no SPIFFS
IWIP variant: v2 lower memory
Vtables: flash
CPU frequency: 80
upload speed: 115200
erase flash: only sketch
I've read some people saying there is not enough memory to do this?
Here is what I tried...
With the Arduino IDE, I uploaded the example firstOTA and flashed via serial port.
After resetting I can see my network port and I can ping thing dev
now if I try to flash blink from the network port, it keep giving me this message...
Bad Answer: ERR: ERROR[8]: Flash config wrong real: 2 IDE: 524288
Flash size: 512 no SPIFFS
IWIP variant: v2 lower memory
Vtables: flash
CPU frequency: 80
upload speed: 115200
erase flash: only sketch