SparkFun Forums 

Where electronics enthusiasts find answers.

Have questions about a SparkFun product or board? This is the place to be.
By declanshanaghy
#199598
I want to build sound reactive LEDs using the SparkFun sound detector. Hooked everything up and got a nice output from the detector so I proceeded to add the led strip. Then I noticed that the strip is interfering with the audio signal.

I'm not sure how and have limited experience with audio. Attached is a screen capture of the audio and envelope signals from the detector. The interference can clearly be seen in the first half. The second half is where I unplugged the LEDs.

Any ideas?


Full rez: https://photos.app.goo.gl/P2YpGn2i1VzLsvez6
You do not have the required permissions to view the files attached to this post.