- Thu Jun 28, 2018 8:44 am
#199598
I want to build sound reactive LEDs using the SparkFun sound detector. Hooked everything up and got a nice output from the detector so I proceeded to add the led strip. Then I noticed that the strip is interfering with the audio signal.
I'm not sure how and have limited experience with audio. Attached is a screen capture of the audio and envelope signals from the detector. The interference can clearly be seen in the first half. The second half is where I unplugged the LEDs.
Any ideas?
Full rez: https://photos.app.goo.gl/P2YpGn2i1VzLsvez6
I'm not sure how and have limited experience with audio. Attached is a screen capture of the audio and envelope signals from the detector. The interference can clearly be seen in the first half. The second half is where I unplugged the LEDs.
Any ideas?
Full rez: https://photos.app.goo.gl/P2YpGn2i1VzLsvez6
You do not have the required permissions to view the files attached to this post.