- Wed Apr 11, 2018 11:43 am
#198921
Hi. I am having trouble getting the Arduino IDE to talk to my Pro Micro.
Running Ubuntu Mint, the IDE fires up OK, but:
1) What programmer type should be selected for direct USB connection.
2) Should I see a port when I use a USBasp. It is grayed out. Linux is seeing the interface when it starts up
Apr 11 19:29:59 skennie-Vostro1510 kernel: [ 2752.712190] usb 5-2: new low-speed USB device number 3 using uhci_hcd
Apr 11 19:29:59 skennie-Vostro1510 kernel: [ 2752.883594] usb 5-2: New USB device found, idVendor=16c0, idProduct=05dc
Apr 11 19:29:59 skennie-Vostro1510 kernel: [ 2752.883602] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr 11 19:29:59 skennie-Vostro1510 kernel: [ 2752.883608] usb 5-2: Product: USBasp
Apr 11 19:29:59 skennie-Vostro1510 kernel: [ 2752.883612] usb 5-2: Manufacturer: www.fischl.de
The target may be bricked, flashing 1s on, 0.1 off, but this starts again about 3s after double reset.
IDE message using USBasp:
Sketch uses 4126 bytes (14%) of program storage space. Maximum is 28672 bytes.
Global variables use 149 bytes (5%) of dynamic memory, leaving 2411 bytes for local variables. Maximum is 2560 bytes.
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
Couldn't find a Board on the selected port. Check that you have the correct port selected. If it is correct, try pressing the board's reset button after initiating the upload.
Please advise
Running Ubuntu Mint, the IDE fires up OK, but:
1) What programmer type should be selected for direct USB connection.
2) Should I see a port when I use a USBasp. It is grayed out. Linux is seeing the interface when it starts up
Apr 11 19:29:59 skennie-Vostro1510 kernel: [ 2752.712190] usb 5-2: new low-speed USB device number 3 using uhci_hcd
Apr 11 19:29:59 skennie-Vostro1510 kernel: [ 2752.883594] usb 5-2: New USB device found, idVendor=16c0, idProduct=05dc
Apr 11 19:29:59 skennie-Vostro1510 kernel: [ 2752.883602] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr 11 19:29:59 skennie-Vostro1510 kernel: [ 2752.883608] usb 5-2: Product: USBasp
Apr 11 19:29:59 skennie-Vostro1510 kernel: [ 2752.883612] usb 5-2: Manufacturer: www.fischl.de
The target may be bricked, flashing 1s on, 0.1 off, but this starts again about 3s after double reset.
IDE message using USBasp:
Sketch uses 4126 bytes (14%) of program storage space. Maximum is 28672 bytes.
Global variables use 149 bytes (5%) of dynamic memory, leaving 2411 bytes for local variables. Maximum is 2560 bytes.
PORTS {} / {} => {}
PORTS {} / {} => {}
PORTS {} / {} => {}
Couldn't find a Board on the selected port. Check that you have the correct port selected. If it is correct, try pressing the board's reset button after initiating the upload.
Please advise