SparkFun Forums

[judev]

Im trying to understand more about how the Reset on the environmental combo works: https://learn.sparkfun.com/tutorials/cc ... okup-guide

The guide says to set it low when doing a reset. Is the RST line suppose to remain high in the mean time? Or does it matter? What should I expect to see when I connect the RST to ground (low)? Should I build some software in my ESP to handle this reset? Just wondering if anyone has gotten this to work.

Thanks!

[paulvha]

the reset line has an pull-up resistor on the board. No need to set it high, just low for reset. This is a nice board with good sensors. I have connected it to my RaspberryPi. You can find the documentation and sources on https://github.com/paulvha/air_combo_sensor