SparkFun Forums

[jrshell]

Has anyone successfully used a Mac with the Qduino? I've tried both Mac and Linux and have been unsuccessful in getting either computer to recognize the board. When I try to select a port the only thing available is Bluetooth. Using the online resources it would seem all you need is the Arduino IDE and Sparkfun Boards link.

I'm not sure where to start with details since the online Qduino help for Mac is scarce at best. Seems this isn't uncommon but I have yet to see a solution. Please share...

[theropod]

Can you tell us what serial chip is on the board? I suspect your issue is related to the CH340 chip. If this is the case you will have to download and install a chip specific driver. Below is a link to that chipset driver.

http://www.wch.cn/downloads.php?name=pro&proid=5

RS