- Thu Sep 15, 2016 3:05 am
#191683
Hi,
We are connecting Openscale to 50kg load cells and not getting consistent readings. Followed the hookup guide, calibrated. However when leaving weight on we are getting only +- 20% accuraracy. We left for 30 min as advised - same result. We aim for 5% accuracy. Appreciate any suggestions.
We are connecting Openscale to 50kg load cells and not getting consistent readings. Followed the hookup guide, calibrated. However when leaving weight on we are getting only +- 20% accuraracy. We left for 30 min as advised - same result. We aim for 5% accuracy. Appreciate any suggestions.