- Tue Jun 14, 2016 3:06 pm
#190239
I am trying to upload the Laundry_Monitor to the blynk board.
Here are the Arduino setting I have the Arduino on.
(Arduino 1.6.8, Board "SparkFun Blynk Board", Port "/dev/cu.usbserial-DN01AM51")
Here is the web page =
https://learn.sparkfun.com/tutorials/bl ... ryer-alarm
It will upload other sketches, ok but its now compiling this sketch,
Here are the Arduino setting I have the Arduino on.
(Arduino 1.6.8, Board "SparkFun Blynk Board", Port "/dev/cu.usbserial-DN01AM51")
Here is the web page =
https://learn.sparkfun.com/tutorials/bl ... ryer-alarm
It will upload other sketches, ok but its now compiling this sketch,