ISL29125 RGB Sensor

Have questions about a SparkFun product or board? This is the place to be.

Moderators: phalanx, TS-Tim

Post Reply
mitchballe
Posts: 1
Joined: Sat May 21, 2016 7:30 pm

ISL29125 RGB Sensor

Post by mitchballe » Sat May 21, 2016 7:55 pm

Can multiple ISL29125 RGB Sensors be hooked up to an Arduino without a multiplexer? The data sheet seems to say the device address is hardwired, so I'm thinking not. I just wanted to verify that.

Post Reply