- Thu Dec 24, 2015 7:23 am
#186773
Hi there!
I've followed this guide: https://learn.sparkfun.com/tutorials/es ... okup-guide, but for some reason the arduino can't talk to the ESP8266 module. I get the following output:
I've followed this guide: https://learn.sparkfun.com/tutorials/es ... okup-guide, but for some reason the arduino can't talk to the ESP8266 module. I get the following output:
Press any key to begin.The error appears instantly after I key in some letters and press enter. The switch on the ESP8266 is set to SW, as per instructions in the guide. Things are so completely failing to work that I'm most likely doing something wrong, but I can't figure out what . Any ideas? Thank you!
Press any key to begin.
Error talking to ESP8266.
Error: 0
Looping forever.