DSO Nano V3 Oscilloscope

DSO Nano V3 Oscilloscope#181607

By LogicalUnit - Wed Apr 29, 2015 2:10 am

- Wed Apr 29, 2015 2:10 am #181607

Hi all,

I'm after a good general-purpose oscilloscope for myself. I'd like to know how this device measures up. I don't have a specific project in mind, but I'd definitely like something useful for Arduino and other simple-to-medium complexity tasks. Any recommendations would be appreciated.

Many thanks

Re: DSO Nano V3 Oscilloscope#181616

By DanV - Wed Apr 29, 2015 6:53 am

- Wed Apr 29, 2015 6:53 am #181616

Reviews are available on this page (scroll down a good ways):
http://www.amazon.com/Seeedstudio-TOL01 ... B00BB4ETJW

Re: DSO Nano V3 Oscilloscope#181700

By LogicalUnit - Fri May 01, 2015 6:34 pm

- Fri May 01, 2015 6:34 pm #181700

After reading the reviews, I decided to go with the DSO Quad. It has 2x Analog + 2x Digital channels.

Re: DSO Nano V3 Oscilloscope#181711

By Ross Robotics - Sat May 02, 2015 10:54 am

- Sat May 02, 2015 10:54 am #181711

I've read the reviews as well, and I would spend a few extra bucks to get a real Oscilloscope.

------------------------------------------------------------------------------------------------------------------------------------------------------------
//codlink
Available for circuit and PCB design, just PM me!

Re: DSO Nano V3 Oscilloscope#181722

By uChip - Sun May 03, 2015 10:23 am

- Sun May 03, 2015 10:23 am #181722

+1 for codlink's recommendation. You can get a real scope for around $250 or less on eBay used. Or spend about $400 and get a brand new 4 channel full featured scope.

If you stick with electronics, you will outgrow the Nano almost immediately. The real scope will serve you a long time. On the other hand, if you tire of electronics, the Nano is pretty much trash where a real scope can be sold for a good fraction of its original coast.

SparkFun Forums