Page 1 of 1

OpenLog firmware update

Posted: Thu Jul 15, 2010 6:32 am
by Woehrle
Hey everyone,
Has anyone successfully gotten the OpenLog to work with FAT32? I've tried Tz's FAT32 library, but there isn't much documentation on it. =[
If anyone has gotten FAT32 to work:
What firmware did you use?
Possible quick tutorial?

Thanks,
Woehrle

P.S.
I have tried GHI electronic's uALFAT logger, but sadly it does not handle well in the cold. Which is where I need it. (-80 C) The OpenLog works in that temp. =]

Re: OpenLog firmware update

Posted: Thu Jul 15, 2010 7:33 am
by coyote20000
I knew Minnesota was cold. I didn't know it was that cold!!! Lol.. :wink:

Re: OpenLog firmware update

Posted: Thu Jul 15, 2010 11:57 pm
by Polux rsv
-80°C :shock: You will need military grade electronics :mrgreen:

Angelo

Re: OpenLog firmware update

Posted: Fri Jul 16, 2010 5:25 am
by Woehrle
The OpenLog and a Arduino mini pro have been in a -80 C freezer for about a week now, and it is still logging. =]
I even did a cold start test, where it was without power for 24hrs to see if it would boot up. With this kind of performance from SparkFun equipment we might see a Arduino on a a1 abrams tank. =]

I will post pictures later today.

Re: OpenLog firmware update

Posted: Wed Aug 04, 2010 7:37 am
by sparky
I must see this picture of an OpenLog on a tank. Or, maybe not....

New v2 firmware is released for the OpenLog. It's still under a bit to test hammering, but it handles 8GB FAT32 SDHC cards swimmingly (I've always wanted to use that word in a sentence). Please give it a whirl:

http://github.com/nseidle/OpenLog/tree/ ... penLog_v2/

It's now an Arduino sketch so firmware updating and changing should be much easier.

Cheers,
-Nathan

Re: OpenLog firmware update

Posted: Wed Aug 04, 2010 8:10 am
by coyote20000
Awesome!
:D