Buzzer Used in RFID USB where can I get them?

Buzzer Used in RFID USB where can I get them?#102231

By madeinoz - Wed Jun 02, 2010 1:34 am

- Wed Jun 02, 2010 1:34 am #102231

Does Sparkfun sell the SMD buzzers as used on the RFID USB board? If not where can I get them?

I have a project where I need a low profile SMD buzzer just like this one.

thanks...

Wireless Widget Project (Open Source Hardware Project) - http://code.google.com/p/strobit

Re: Buzzer Used in RFID USB where can I get them?#102312

By follower - Thu Jun 03, 2010 5:41 am

- Thu Jun 03, 2010 5:41 am #102312

madeinoz wrote:If not where can I get them?

You can have my one if you desolder it off the board.

(I stuffed Blu-tack in it to try to shut it up....)

--Philip;

Re: Buzzer Used in RFID USB where can I get them?#102753

By SFE-Mike - Wed Jun 09, 2010 3:50 pm

- Wed Jun 09, 2010 3:50 pm #102753

This unloved part is available from DigiKey, no. 102-1265-1-ND.

And it looks like the next revision of the PCB will have a solder jumper to easily disconnect the buzzer <loud cheering>...

-Mike, SparkFun Electronics
"This is only temporary. Unless it works!" -Red Green

Note: To get tech support from SparkFun, please email techsupport@sparkfun.com. SFE tech support doesn't constantly monitor the forums.

Re: Buzzer Used in RFID USB where can I get them?#102754

By madeinoz - Wed Jun 09, 2010 4:13 pm

- Wed Jun 09, 2010 4:13 pm #102754

SFE-TS-Mike wrote:This unloved part is available from DigiKey, no. 102-1265-1-ND.

And it looks like the next revision of the PCB will have a solder jumper to easily disconnect the buzzer <loud cheering>...

Ahhh thanks for that

Wireless Widget Project (Open Source Hardware Project) - http://code.google.com/p/strobit

SparkFun Forums