SparkFun Forums

Where electronics enthusiasts find answers.

By rglissmann - Sat Nov 20, 2004 10:35 am

- Sat Nov 20, 2004 10:35 am #2262

What drill diameter is required for the header on the RF-24G Transceiver? I can't find it in the datasheet.

Thanks

By sparky - Tue Nov 30, 2004 4:00 pm

- Tue Nov 30, 2004 4:00 pm #2322

We use 0.7mm on our breakout PCBs. When plated, the holes fit snugly on the transceiver header.

-Nathan