- Wed Aug 08, 2018 4:15 pm
#199989
Hi I am using XBee pro xsc 900 mHz for RF cummunication. While communicating with XBee via XCTU, I can add the device to the software but the problem is about writing any value to xBee like HP, DT etc.
When I write a value to the xBee and refresh it, it shows a different value than I wrote. Every time I refresh the setting value, it writes a different value which is most probably random. What might be the problem? I am using an usb explorer to connect XBee to the PC.
When I write a value to the xBee and refresh it, it shows a different value than I wrote. Every time I refresh the setting value, it writes a different value which is most probably random. What might be the problem? I am using an usb explorer to connect XBee to the PC.