Powering ThingMagic M6e via UNO

All things pertaining to wireless and RF links

Moderator: phalanx

Post Reply
Posts: 3
Joined: Tue May 23, 2017 4:06 am

Powering ThingMagic M6e via UNO

Post by Tash777 » Thu Jun 22, 2017 1:24 am


I was wondering if anybody was having trouble powering their ThingMagic M6e nano module via the Arduino UNO?
Mine will power fine via USB and run my program.
When I switch to a standalone 9v power supply via the 2.1mm jack on the UNO my program will not run. I do however see that the red LED on the ThingMagic M6e nano module shield does light up but the program does not run.

I have tried different power sources and also another UNO board with the same results.

Any help would be appreciated.

Post Reply