- Wed May 17, 2017 10:12 pm
#194915
Hi,
I'm trying to get my Simultaneous RFID Tag Reader to work with the arduino library that Nate wrote. https://learn.sparkfun.com/tutorials/si ... kup-guide/ I have the board working with ThinkMagic's UniversalReaderAssistant app on a PC and I have the board powered with an external 5v supply as recommended.
The problem appears to be with the setupNano function, specifically the call to getVersion() returns 1, where 1 = ERROR_COMMAND_RESPONSE_TIMEOUT
The specific opcode for this command is
TMR_SR_OPCODE_VERSION 0x03
I really don't know what to do next to diagnose the problem. I have tried forcing the code to continue but it remains unresponsive. I have checked the critical connections (GND 5V D2, D3) and made sure that it in in SW_UART mode. I'm using an Arduino Leonardo board.
Has anyone else had this problem?
Thanks,
Rob
I'm trying to get my Simultaneous RFID Tag Reader to work with the arduino library that Nate wrote. https://learn.sparkfun.com/tutorials/si ... kup-guide/ I have the board working with ThinkMagic's UniversalReaderAssistant app on a PC and I have the board powered with an external 5v supply as recommended.
The problem appears to be with the setupNano function, specifically the call to getVersion() returns 1, where 1 = ERROR_COMMAND_RESPONSE_TIMEOUT
The specific opcode for this command is
TMR_SR_OPCODE_VERSION 0x03
I really don't know what to do next to diagnose the problem. I have tried forcing the code to continue but it remains unresponsive. I have checked the critical connections (GND 5V D2, D3) and made sure that it in in SW_UART mode. I'm using an Arduino Leonardo board.
Has anyone else had this problem?
Thanks,
Rob