- Fri Apr 21, 2017 3:30 pm
#194472
I'm a first-time XBEE user having some serious trouble. When i connect them via USB to my computer and open up a serial port, I see the XBee counting up like so:
00000128
00000129
0000012A
0000012B
0000012C
0000012D
Despite not being connected to another XBee! The counting sequence resets upon losing power. Is this supposed to be happening? How would I see data being sent if it's just jumbled with counting?
I turned to serial because XTCU was also giving me weird bugs. It would connect, but then fill all the values with garbage on configuration.
With serial, +++ makes the counting stop, and ATID, ATMY, and ATSL return reasonable values. However, ATDL just returns an error.
I'm using an XBEE Pro S3B Xbee (XBP9B-XCST-002 revM).
Does anyone have any insight into what's going on?
00000128
00000129
0000012A
0000012B
0000012C
0000012D
Despite not being connected to another XBee! The counting sequence resets upon losing power. Is this supposed to be happening? How would I see data being sent if it's just jumbled with counting?
I turned to serial because XTCU was also giving me weird bugs. It would connect, but then fill all the values with garbage on configuration.
With serial, +++ makes the counting stop, and ATID, ATMY, and ATSL return reasonable values. However, ATDL just returns an error.
I'm using an XBEE Pro S3B Xbee (XBP9B-XCST-002 revM).
Does anyone have any insight into what's going on?