SparkFun Forums 

Where electronics enthusiasts find answers.

All things pertaining to wireless and RF links
By thomasw71
#192810
Hi, when running the RN131 in sleep mode Im reading 50mA of current. Ive issolated my circuit from the possible cause.
Any ideas why its drawing so much.
Im not using boost, Im only using TX RX pins.

Thanks
By thomasw71
#192852
Hi, using a pull down did not work, still drawing 50mA.
When I force RESET on the module low, the power drops to around 3mA which is what I expected with the MPU running.

thanks