SparkFun Forums

[cinvoke]

I was in the middle of flashing the chip via term session / command mode and ftp. the session was broken and now i can't connect at all. Is this recoverable ? Any advice or debugging links would be greatly appreciated.
Is there some kindve raw recoverymode i can force?
a pin to pull high?
anything...

Wanted to update with more info:

i get a framing error at 9600 baud.
but at 115200 baud, i get this:

Auto-Assoc chan=1 mode=MIXED SCAN OK
Disconn from ,AUTH-ERR
Disconn from ,AUTH-ERR
Disconn from ,AUTH-ERR
Disconn from ,AUTH-ERR
Joining now..
Auto-Assoc chan=1 mode=MIXED SCAN OK
Disconn from ,AUTH-ERR
Disconn from ,AUTH-ERR
Disconn from ,AUTH-ERR
Disconn from ,AUTH-ERR

Last resort, im going to try JTAGulator to see if i can do anything through the debug interface. At least i think the 8 surface points i see to the left of RN-XV is an 'on-chip debug interface'.

[dan_cuspi]

did you managed fixing this?