- Wed May 27, 2015 8:32 am
#182282
Hello all,
I am hoping that there is somebody out there who can help me with logic conversion. I am using a logomatic serial data logger. I have a basic two transistor logic level converter from the computer to the board. My issue is that when I log data in mode 0, I get back garbage. The garbage is consistent, but still garbage. The baud rates, parity, stop bits, etc. match. I have used an INTRONIX Logicport to see what is happening before and after logic level conversion. According to the logic analyzer, everything works fine, but what I get on the sd card in the logger tells a different story. So, I am just wondering if anybody has had similar issues.
Thank you,
Frank
I am hoping that there is somebody out there who can help me with logic conversion. I am using a logomatic serial data logger. I have a basic two transistor logic level converter from the computer to the board. My issue is that when I log data in mode 0, I get back garbage. The garbage is consistent, but still garbage. The baud rates, parity, stop bits, etc. match. I have used an INTRONIX Logicport to see what is happening before and after logic level conversion. According to the logic analyzer, everything works fine, but what I get on the sd card in the logger tells a different story. So, I am just wondering if anybody has had similar issues.
Thank you,
Frank