SparkFun Forums

[kiranand]

I just bought an LPC-MT board and also an ARM-JTAG. When I power it on I get the Olimex message on the LCD so I guess the board is fine, however here is my problem when I tried to use the ARM-JTAG with the board:

From the Macraigor website
I had installed Cygwin and downloaded the GNU and OCD from Macraigor. When I try to run the OCD as follows:

OCDLibRemote -c ARM7 -p 8888 -d WIGGLER -a 1

I get a

"NT DRIVER NOT FOUND
MAC_MOT.SYS"

I am using a Windows 2000 PC host.

Any help would be appreciated.

message.

Thanks.