Search found 3 matches

by wjzhang
Fri May 12, 2017 2:48 am
Forum: OpenOCD
Topic: the Pipeline connection rejected
Replies: 1
Views: 613

Re: the Pipeline connection rejected

sorry, my bad. command line is wrong.
should be
arm-none-eabi-gdb custom-section.elf
(gdb) target remote | openocd -f board/mb00xx.cfg -c "gdb_port pipe" -c "log_output openocd.log"
......
(gdb) mon reset halt
by wjzhang
Thu May 11, 2017 8:36 pm
Forum: OpenOCD
Topic: the Pipeline connection rejected
Replies: 1
Views: 613

the Pipeline connection rejected

when i used ./configure --enable-cmsis-dap --disable-werror compile openocd in migGW/msys 32. it work on TCP port 3333. but failed on Pipeline. it rejected. logs: Info : CMSIS-DAP: SWD Supported Info : CMSIS-DAP: Interface Initialised (SWD) Info : CMSIS-DAP: FW Version = 1.0 Info : SWCLK/TCK = 0 SWD...
by wjzhang
Thu May 11, 2017 2:57 am
Forum: OpenOCD
Topic: why openocd using padding between two split image sections
Replies: 0
Views: 567

why openocd using padding between two split image sections

Hi: we want use high end address flash to stored some data, so create a custom elf section. it'll create image two parts. one is text/data section, another is our custom section. like below: -------------- <-- start of flash text code -------------- data -------------- --------------- custom section...