Search found 6 matches

by JohnKoz
Mon Dec 11, 2017 5:35 am
Forum: OpenOCD
Topic: JTAG-DP STICKY ERROR - Photon
Replies: 0
Views: 97

JTAG-DP STICKY ERROR - Photon

Hi folks, I've searched quite a bit regarding the error I'm seeing in OpenOCD, when connecting to the Particle Programmer Shield and the Photon. I haven't been able to get past this for weeks. Are there any tips or hints on how to troubleshoot this error? Even narrowing it down between firmware buil...
by JohnKoz
Sat Dec 09, 2017 1:00 pm
Forum: OpenOCD
Topic: Firmware debugging breaks with SIGINT - Photon Programmer Shield
Replies: 0
Views: 59

Firmware debugging breaks with SIGINT - Photon Programmer Shield

Hi folks, First time using the Photon Programmer Shield, and I spent some time following the guidance to build and flash the firmware and configured OpenOCD and GDB to debug. [5 steps to setup and use a debugger with the Photon](https://community.particle.io/t/5-steps-to-setup-and-use-a-debugger-wit...
by JohnKoz
Wed Feb 08, 2017 3:48 pm
Forum: PCB Design Questions
Topic: Using a PCB Template?
Replies: 3
Views: 671

Re: Using a PCB Template?

I'm able to close out the answer to my own question. I had mistakenly added the component (from the library) directly to my board layout, instead of my schematic. As such, it only existed there as an image, instead of an electrical component. Adding it instead to the schematic, gave me an electrical...
by JohnKoz
Wed Feb 08, 2017 10:50 am
Forum: PCB Design Questions
Topic: Using a PCB Template?
Replies: 3
Views: 671

Re: Using a PCB Template?

Sorry, I provided the wrong link in my original post, and I can't find a way to edit.

I was actually referring to the raspberrypi_bastelstube_v13 library (http://eagle.autodesk.com/eagle/download/254).

I'm pursuing an answer elsewhere, I'll post the same here when I figure it out.

-John
by JohnKoz
Tue Feb 07, 2017 7:04 pm
Forum: PCB Design Questions
Topic: Using a PCB Template?
Replies: 3
Views: 671

Re: Using a PCB Template?

By the way, here is the 'template' component I'm referencing.
Notice this is ONE component/image, with the origin in the lower left.
SampleEagleTemplate.png
-John
by JohnKoz
Mon Feb 06, 2017 4:35 pm
Forum: PCB Design Questions
Topic: Using a PCB Template?
Replies: 3
Views: 671

Using a PCB Template?

HI folks, I'm new to PCB design, sorry for the remedial question. :oops: I downloaded an Eagle template from flyfish-tech.com, http://www.flyfish-tech.com/pub/RasPi-BplusHAT.zip and was able to paste the image fine on my board (brd) surface. However it is just a single image of a board, and there ar...