Search found 4 matches

by 153rd
Sun Oct 19, 2014 11:20 pm
Forum: OpenOCD
Topic: Driver not found
Replies: 2
Views: 1155

Re: Driver not found

Hey pinkesh.

What did you try until now?
When looking at that config file:

# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
cortex_m reset_config sysresetreq

It seems like ' something' goes wrong here.
Try to start looking there.

Good luck!
by 153rd
Tue Oct 07, 2014 5:32 am
Forum: OpenOCD
Topic: Writing a new flash driver guidelines?
Replies: 2
Views: 1100

Re: Writing a new flash driver guidelines?

Hey Vankata,

If I'm not mistaken you can check out the openOCD manual:

http://openocd.sourceforge.net/doc/pdf/openocd.pdf

chapter 12/13 ?
Not sure how to fix the problem, but it might help.

Good luck!

153rd
by 153rd
Tue Oct 07, 2014 3:03 am
Forum: OpenOCD
Topic: TI TIVA C Series, ST-Link V2, OpenOCD SWD ?
Replies: 2
Views: 1405

Re: TI TIVA C Series, ST-Link V2, OpenOCD SWD ?

Hi Qdrone,

You're not supplying enough information to help us help you.

What OS are you using?
What commands did you try, how did the system respond?

Regards,

153rd
by 153rd
Tue Oct 07, 2014 2:58 am
Forum: OpenOCD
Topic: OpenOCD JTAG chain interrogation failing with FT4232
Replies: 0
Views: 1292

OpenOCD JTAG chain interrogation failing with FT4232

Hi Guys, I'm trying to use openOCD to debug a custom board(NavStik, see http://navstik.org/home/), implementing: FTDI FT4232H STM32F407 I've built the newest libusb (with --enable-ftdi) and run ubuntu 14.04(64 bits). This is the command I give: sudo openocd -f ~/Downloads/openocd.8.0/tcl/interface/f...