Search found 6 matches

by Homncruse
Fri Apr 16, 2010 2:09 pm
Forum: OpenOCD
Topic: Building OpenOCD/FTDI for Vista64 - a crude guide
Replies: 8
Views: 11757

Re: Building OpenOCD/FTDI for Vista64 - a crude guide

I may as well contribute my crudeness to this crude guide. If I was any good at shell scripting, I'd make this robust to check for 32-bit or 64-bit, Windows or Linux, etc. In other words, a simplification wrapper around configure. But I don't really know where to begin on that, and a shell script is...
by Homncruse
Wed Apr 14, 2010 1:38 pm
Forum: Everything ARM and LPC
Topic: OpenOCD (64-bit FTDI compile) + Flyswatter + LPC2368 .cfg?
Replies: 5
Views: 2029

Re: OpenOCD (64-bit FTDI compile) + Flyswatter + LPC2368 .cfg?

It seems that part of my issue was that I was simply using a buggy version of gdb, but there are a few lingering warnings and errors I can't seem to find any information on. $ ./openocd.exe -f ../tcl/interface/flyswatter.cfg -f ../tcl/target/lpc2378.cfg Output from OpenOCD: Open On-Chip Debugger 0.5...
by Homncruse
Tue Apr 13, 2010 4:35 pm
Forum: Everything ARM and LPC
Topic: OpenOCD (64-bit FTDI compile) + Flyswatter + LPC2368 .cfg?
Replies: 5
Views: 2029

Re: OpenOCD (64-bit FTDI compile) + Flyswatter + LPC2368 .cfg?

bobcousins wrote:
Homncruse wrote: But when I open gdb and issue "target remote localhost:4444", I get the following:
Should it be "target remote localhost:3333" for gdb ?
Yeah... long day. Typo in the post, I've actually been doing 3333.
by Homncruse
Tue Apr 13, 2010 3:08 pm
Forum: Everything ARM and LPC
Topic: OpenOCD (64-bit FTDI compile) + Flyswatter + LPC2368 .cfg?
Replies: 5
Views: 2029

Re: OpenOCD (64-bit FTDI compile) + Flyswatter + LPC2368 .cfg?

I found a lpc2378.cfg in the tcl/target directory (why is there a redundant /openocd/interface and /openocd/board directory when they exist in /openocd/tcl?). It seems to connect fine, though it gives me EmbeddedICE errors: $ ./openocd.exe -f ../tcl/interface/flyswatter.cfg -f ../tcl/target/lpc2378....
by Homncruse
Tue Apr 13, 2010 11:24 am
Forum: Everything ARM and LPC
Topic: OpenOCD (64-bit FTDI compile) + Flyswatter + LPC2368 .cfg?
Replies: 5
Views: 2029

OpenOCD (64-bit FTDI compile) + Flyswatter + LPC2368 .cfg?

So I'm reasonably confident that my OpenOCD compilation is working fine and that I just don't know how to use it. I'm trying to connect to an LPC2368 through a Tin Can Tools Flyswatter. When I run OpenOCD with default flyswatter.cfg file, I get the following output: $ ./openocd.exe -f ../interface/f...
by Homncruse
Fri Apr 09, 2010 4:11 pm
Forum: OpenOCD
Topic: Building OpenOCD/FTDI for Vista64 - a crude guide
Replies: 8
Views: 11757

Re: Building OpenOCD/FTDI for Vista64 - a crude guide

First off, THANK YOU for this guide! I've spent all day trying to get OpenOCD to work with my new Flyswatter from Tin Can Tools. This whole thing was brought about by the fact that I've upgraded my dev setup to Win7 x64, and our previous debug setup relied on a Macraigor usbDemon. Macraigor doesn't ...