Search found 6 matches

by marianmp
Tue Nov 26, 2013 6:45 am
Forum: BatchPCB
Topic: PCB CNC machine
Replies: 76
Views: 75300

Re: PCB CNC machine

Hello @rf333,
Thank you for the help. Finally I ordered the top model http://www.accuratecnc.com/Specs/A637.pdf with vaccum table and expect to receive it for Christmas :)
by marianmp
Fri Oct 11, 2013 12:45 am
Forum: BatchPCB
Topic: PCB CNC machine
Replies: 76
Views: 75300

Re: PCB CNC machine

Hello @rf333, Do you have an idea what is the maximum depth of drilling/cutting of your machine. I am looking for an ATC machine for drilling holes in very thick 9.5mm (fiber epoxy material, garolite). The drill sizes are different, but many of them are 0.68 mm. High precision is required. The holes...
by marianmp
Thu Oct 10, 2013 5:20 am
Forum: BatchPCB
Topic: My board keeps getting failed, what's wrong?
Replies: 2
Views: 3046

Re: My board keeps getting failed, what's wrong?

Hi. I'm very new to this. I've used eagle to generate the gerber files. I've followed a guide at youtube, set spacings and trace width to 8 mil and drill to 20mil and gotten eight gerber files (.sol .plc. .ncd .gpi .dri .cmp .sts .stc). I upload it on BatchPCB and I get to see my gerber files and t...
by marianmp
Wed Apr 06, 2011 3:03 am
Forum: BatchPCB
Topic: PCB CNC machine
Replies: 76
Views: 75300

Re: PCB CNC machine

Hello everyone … I need help! Have to make a board from material that I am not familiar with. It looks like 3 layers, copper 0.03 to 0.05mm, insulation with similar thickness and aluminum close to 1mm. The sample is close to the size needed so I would like to avoid any error. Is there anyone that ha...
by marianmp
Tue Jun 23, 2009 8:31 am
Forum: BatchPCB
Topic: PCB CNC machine
Replies: 76
Views: 75300

My vacuum is outside the office in a small storage room, so I don't have any noise or dust problems :)
by marianmp
Wed Mar 04, 2009 10:06 am
Forum: BatchPCB
Topic: PCB CNC machine
Replies: 76
Views: 75300

I strongly recommend Accurate 360. I have got one, equipped with camera 6 months ago. It is excellent. Use to have Protomat C60 by LPKF, this one is better because of motorized Z axis. The software is good and very friendly. Now I am looking for thru hole plating. What I found at LPKF site is a tech...